01
01 / 06
Breakdown and fault finding
Mechanical, electrical and pneumatic fault diagnosis, on site.
- On-site troubleshooting and repairs
- Mechanical and electrical adjustments
- Pneumatic fault diagnosis
- Replacement of worn or damaged components
On site, across the UK
Edgebander servicing and repairs
From a first inspection to a full service, fault finding and operator training: everything a busy edgebander needs to keep running.
Six things we do on site
Long-term fixes, not quick ones.
Independent support across many edgebander makes, honest and practical advice for your machine, and flexible on-site support designed to keep downtime down.
- 01Breakdown and fault findingMechanical, electrical and pneumatic fault diagnosis, on site.
- 02Servicing and preventative maintenanceScheduled maintenance that catches problems before they cost you a shift.
- 03Machine calibrationAdjustment and calibration that brings the edge quality back.
- 04Glue systemsCleaning, maintenance, troubleshooting and optimisation.
- 05CommissioningMachine set-up, testing and production optimisation.
- 06Operator trainingPractical training that helps operators spot problems early.
02
02 / 06
Servicing and preventative maintenance
Scheduled maintenance that catches problems before they cost you a shift.
- Routine cleaning and maintenance
- Feed system checks
- Mechanical and electrical adjustments
- Recommendations to prevent future breakdowns
03
03 / 06
Machine calibration
Adjustment and calibration that brings the edge quality back.
- Alignment and calibration
- Trimming and finishing units set up
- Better edge quality and performance
- Honest performance feedback
04
04 / 06
Glue systems
Cleaning, maintenance, troubleshooting and optimisation.
- Cleaning
- Maintenance
- Troubleshooting
- Glue system optimisation
05
05 / 06
Commissioning
Machine set-up, testing and production optimisation.
- Machine set-up
- Testing
- Production optimisation
06
06 / 06
Operator training
Practical training that helps operators spot problems early.
- Daily operation training
- Best practice cleaning and maintenance
- Machine health monitoring
- Support for new or inexperienced operators
Inspection report
Edge Assist Ltd
Machine
Make / model
Site
Your workshop
Engineer
Edge Assist
Every inspection includes
- Full assessment of machine condition
- Wear, misalignment, glue and feed problems found
- Recommendations to prevent future breakdowns
- Honest performance feedback and maintenance needs
Serviced every 3 to 6 months.
Depending on how hard it works. Routine servicing finds wear, alignment and glue system problems early, keeps the edge quality consistent and makes the machine last longer.
SERVICED
By
Edge Assist
Next due
3 to 6 months
Book on 07961 849601
Q01How often should an edgebander be serviced?
Every 3 to 6 months, depending on how hard it works. Regular servicing finds wear, alignment and glue system problems early, so the edge quality stays consistent and the machine lasts longer.
Q02Do you come to us?
Yes. We inspect, service and repair on site, anywhere in the UK. The engineer comes to your workshop, finds the fault and carries out the adjustments or repairs with as little disruption to production as possible.
Q03Which machines do you work on?
Most edgebanders, including Biesse, SCM, Homag, Holz-Her, IMA, Casadei, Cehisa, Hebrock, OAV and Nanxing. If yours is not on the list, ask: chances are we do.
Q04Can you help without coming out?
Often, yes. A 45 minute remote support call is £95 plus VAT. Send the make and model, photos, a video and any alarm codes, and we work through it with your operator. If it can't be fixed in the 45 minutes, £45 of the fee comes off the site visit.
Every hour of downtime matters
Machine stopped?
Have the make and model to hand and ring. Or tap what is happening and we call you back.